Vamo V5

It is updated product of Vamo v3 which is also in slim body just like it’s old version. It has variable voltage or you can say voltage control system according to the amount you want to vap in one puff. The digital screen looks better than v3. There are two different tubes you can use both of them to control voltage. The adjustable voltage is 3v to 6v in 0.1v step and 6v to 15v in step 0.5v. 

Vamo v5 does not need any extension it is compatible with all atomizers as it have feature ego 510. It has same sleek design as old v3 have. It can display voltage and wattage in digital screen. It can be fit atomizers with resistance 1.3-5.0 ohm. It can work with 1 x 18650 batteries or 1 x 18350 or 2 x 18350 battery. It is fully protected that no chance to catch fire in pocket as we have seen some early cases. It can give maximum voltage output which is 15v cool enough to produce bundle of vapo at ones. The best thing is it has RMS or MEAN Function which holds the minus button for 20 seconds to switch. Another best feature of vamo v5 is its top part of battery tube can be unscrewed, making the device compatible with any EVOD or MT3.

The new vamo v5 is dual action mod which controls voltage and wattage at a time. It has full metallic buttons and thread ego 510. You need to press 5 times or click 5 times to switch it on which increase the safety measures as it will not automatically start in your jeans pock due to lack of space the older vamo might switched on. The batteries which are supported by vamo v5 are 1 x 18650, 1 x 18350 or 2 x 18350. It will also provide you a notification of low battery before it become empty so you can charge it in time.

How it works:

Using new vamo v5 is very easy if you lose your user guide or you want to know how to use before you buy it, this reading gonna be useful for you.

When you hold your smart vamo v5 you will see a large button this is starter button press frequently and rapidly 5 times in 2 seconds so, the machine know that it is operating by someone not an accidentally pressed after that Switch between VV and VW:Press and hold + and - buttons for 3 seconds now control the voltage by press + and – buttons ones you press + it will increase 0.1 volt similarly when you press + for wattage it will increase 0.5 wattage by one click than press and hold button for 2 seconds it will display which atomizer or cartomizer is being installed. To check battery voltage hold button for 2 seconds and for choosing between RMS or MEAN hold button for 20 seconds.

The plus (+) and minus (-) buttons have three different functions and one combined function. By pressing and leaving it will increase and decrease voltage and wattage, pressing and holding + button for 3 seconds it will display the battery voltage, pressing and holding – button for 3 seconds will display the AD resistance in ohms, pressing and holding + and – buttons simultaneously for 3 sec. will switch from VV to VW. Please do not tight atomizer more than it’s capability otherwise it will push down the pin which transfer voltage or it might get damage br forcing to fix battery without technique.